Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Opel Corsa?

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: Front bumper

Discover, through the attached video, how to proceed with the removal of the front bumper of the Opel Corsa from start to finish. After lifting the front bonnet, locate and remove the mounting bolts along the upper fascia, then focus on the wheel arches, which need to be lifted slightly, behind which you will find more bolts of the aforementioned bumper to remove, completing the job by unscrewing the last bolts located at the bottom, underneath. Once freed, grasp it with your hands to pull it off the vehicle.

Posted on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlight of the Opel Corsa?
How to Remove the Front Headlight of the Opel Corsa?
Vauxhall Corsa (2014-2019 / Corsa E) This guide explains how to remove and replace the front headlight of the Opel Corsa in simple and quick steps. First, open the bonnet and start unscr…
How to replace the front headlight bulb of the Opel Corsa E 2015
How to replace the front headlight bulb of the Opel Corsa E 2015
Vauxhall Corsa (2014-2019 / Corsa E) If one of the bulbs of the front headlight of your Opel Corsa E (2015) suddenly stops working, you must replace it as soon as possible with a new one…
How to Replace the Front Indicator Bulb on an Opel Corsa
How to Replace the Front Indicator Bulb on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before you can begin, open the bonnet of your Opel Corsa. Start by turning the base of the blown bulb anti-clockwise to remove it from its housing. N…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos