Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front bumper of the Opel Corsa

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Front bumper

Today's main steps will show us the process of disassembling and replacing the front bumper of the Opel Corsa. First, we open the hood of the car and start unscrewing all the fastening screws we find on the top of the front bumper and on both sides of the wheel arches; then we pry on the sides of the bumper to unlock it and remove it, as shown in the video. At this point, it will be possible to access the front headlights, disassembling them if necessary; we reassemble and properly fix the new front bumper, applying the reverse process!

Posted on 20 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper of an Opel Corsa
How to Remove the Front Bumper of an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before starting, open the bonnet of your Opel Corsa and fully turn the front wheels to the right. Begin by unscrewing and removing all the screws tha…
Guide to disassembling the front bumper of the Opel Corsa
Guide to disassembling the front bumper of the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Today's main instructions will show us how to disassemble and replace the front bumper of the Opel Corsa, in simple steps. First, we open the hood of…
Removing the Front Bumper on an Opel Corsa
Removing the Front Bumper on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Follow these steps to remove the front bumper from an Opel Corsa C. Lift the bonnet and secure it, then remove the fastening screws located on the pl…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos