|
Do it yourself
| |||
| ||||
How to Touch Up a Car Body with a Brush
Model: Vauxhall Corsa
Corsa D
- Years 2006-2014
In this video, you will see how to touch up a scratch or chip on your car's bodywork, integrating the video with some small tips. Clean the area to be touched up with a specific degreaser, then use very fine wet sandpaper to slightly bevel the edges and create a more receptive surface. Dry thoroughly. Use a precision brush, which you can purchase from ilritocco.net. The precision brush is priced at £3.00: dip only the tip of the bristles in the paint and apply several very thin layers, allowing to dry well between each (about 15 minutes). The goal is to fill the cavity without creating a droplet of paint above the level of the metal. After the paint is completely dry (24 hours), smooth the area with fine-grade polishing compound and finally apply a layer of wax or clear sealant.
Posted on 1 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Vauxhall Corsa
(1993-2000 /
Corsa B)
In this video we see how to change the front headlight of an Opel Corsa version B: first of all, we protect the bodywork with bodywork tape, then we …
Vauxhall Corsa
(2000-2006 /
Corsa C)
The third brake light located at the top centre of the rear heated window is secured to the tailgate body with special pressure fixings that have a p…
Vauxhall Corsa
(2006-2014 /
Corsa D)
In this video we see how to replace the front headlight of an Opel Corsa version D; first of all we cover the bodywork around the headlight with some…
Other guides you may be interested in
|
How to Reset the Central Locking of the Volkswagen Golf 4?
If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.167
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |