Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper of an Opel Corsa C

Model: Vauxhall Corsa Corsa C - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Body

See other generations:
Video tutorial

In this video, we see how to remove the rear bumper of the Opel Corsa C: we start by removing the central screw, then the two side screws on the plastic part at the top. We slightly move the part and focus on the lower side, where we find two clips on the sides.

Connected to the metal part of the bodywork, we will find two 10 mm screws on the sides, hidden in correspondence with the external wheel arches.

Another fastening can be found at the bottom of the wheel arch, always on the inside, on both sides. Once this last fastening is removed, we can remove the entire bumper.


Posted on 14 September 2025 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of an Opel Corsa
How to Remove the Rear Bumper of an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) How to remove the rear bumper of an Opel Corsa? Follow these steps carefully. This operation is not too complex if done in order. First, use a screwd…
Dismantling Rear Bumper on Opel Corsa C
Dismantling Rear Bumper on Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) In this tutorial, you will learn how to remove the rear bumper from an Opel Corsa C. First, remove the screws located under the bumper and then those…
How to Remove the Rear Bumper of the Opel Corsa?
How to Remove the Rear Bumper of the Opel Corsa?
Vauxhall Corsa (2000-2006 / Corsa C) To remove the rear bumper of the Opel Corsa, loosen all the screws securing the piece to its housing: start by loosening those located inside the rea…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos