Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bumper on an Opel/Vauxhall Corsa D

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Rear bumper

To remove the rear bumper from an Opel Corsa D, first remove both rear lights, disconnect the power cable and unscrew the two white nuts to take off the light. Remove the number plate by unscrewing the screws that hold it to the bumper. Unscrew the wheel arch screws on both sides: there are two screws, one at the top and one at the bottom, and detach the bumper starting from the corners. Spray lubricant on the plastic clips to avoid breaking them and disconnect the wiring once the bumper is free. You can find the new bumper on auto-doc.it with EAN code 4052355453303 at a price of £75.49 plus £9.95 for shipping: naturally, the bumper must be painted in the colour of your vehicle. Once in place, follow the reverse order: reconnect the cables, clip in the clips, and refit the screws and lights.

Posted on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Bumper on the Opel Corsa F
Removing the Rear Bumper on the Opel Corsa F
Vauxhall Corsa (2019-2026 / Corsa F) Let's discover the main steps that will allow you to remove the rear bumper on the Opel Corsa F in simple and quick steps. Start by removing all the …
How to Remove the Rear Bumper of the Opel Corsa?
How to Remove the Rear Bumper of the Opel Corsa?
Vauxhall Corsa (2006-2014 / Corsa D) To remove the rear bumper of the Opel Corsa D, first unscrew the screws securing the number plate so it can be completely removed. Under the number p…
How to Remove the Rear Bumper of an Opel Corsa
How to Remove the Rear Bumper of an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before you can start, open the rear tailgate of your Opel Corsa. Begin by unclipping and removing the internal side covers of the boot. Next, unscrew…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos