Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear bumper of the Opel Corsa

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Rear bumper

In the following video tutorial, we will show you how to replace the rear bumper of an Opel Corsa model D. We start by removing the rear right and left headlights by opening the trunk and disconnecting the connectors. To completely remove the headlights, simply open the side flaps and unplug the connectors. Once the headlights are removed, we can move on to removing the bumper by removing the clips that secure it at the bottom. We also remove the license plate by unscrewing the screws, and then remove the bumper by levering on the sides and pulling it out completely. The new bumper is installed by first fitting it into the clips and then inserting the bottom clips and installing the license plate. Then we reassemble the headlights and close the trunk.

Posted on 25 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper on the Opel Corsa VXR?
How to Remove the Rear Bumper on the Opel Corsa VXR?
Vauxhall Corsa (2006-2014 / Corsa D) In this tutorial, you will see how to remove the rear bumper on the Opel Corsa VXR, a very simple and quick operation. First, open the boot lid, then…
How to Remove the Rear Bumper of the Opel Corsa?
How to Remove the Rear Bumper of the Opel Corsa?
Vauxhall Corsa (2000-2006 / Corsa C) To remove the rear bumper of the Opel Corsa, loosen all the screws securing the piece to its housing: start by loosening those located inside the rea…
How do you remove the rear bumper of the Opel Corsa D?
How do you remove the rear bumper of the Opel Corsa D?
Vauxhall Corsa (2006-2014 / Corsa D) The video showing, in this case, an Opel Corsa d without the rear bumper, can be taken into consideration to understand how to disassemble the same b…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos