Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling Rear Bumper on Opel Corsa C

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Rear bumper

In this tutorial, you will learn how to remove the rear bumper from an Opel Corsa C. First, remove the screws located under the bumper and then those found between the bumper and the wheel arch: open the boot lid and unscrew the other screws with a Torx screwdriver located at the top. Now remove all the retaining clips and begin to detach the bumper by levering on the sides; finally, disconnect any electrical connector for the number plate lights, and you will have completed the job!

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Bumper on the Opel Corsa F
Removing the Rear Bumper on the Opel Corsa F
Vauxhall Corsa (2019-2026 / Corsa F) Let's discover the main steps that will allow you to remove the rear bumper on the Opel Corsa F in simple and quick steps. Start by removing all the …
Removing the Rear Bumper of the Opel Corsa
Removing the Rear Bumper of the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) This short guide will show you how to remove and replace the rear bumper of the Opel Corsa, following these simple steps. First, open the boot lid an…
How to Remove the Rear Bumper of the Opel Corsa?
How to Remove the Rear Bumper of the Opel Corsa?
Vauxhall Corsa (2000-2006 / Corsa C) To remove the rear bumper of the Opel Corsa, loosen all the screws securing the piece to its housing: start by loosening those located inside the rea…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos