Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of an Opel Corsa

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Rear bumper

See other generations:
Video tutorial

Before you can start, open the rear tailgate of your Opel Corsa. Begin by unclipping and removing the internal side covers of the boot.

Next, unscrew the bolts securing the rear lights, then disconnect the corresponding connectors, and finally unclip and remove the rear lights. After this, unscrew and remove the bolts securing the rear bumper to the car, located around the entire perimeter.

Once this step is complete, unclip the support hooks, then remove the bumper, successfully finishing the disassembly.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

Removing the Rear Bumper on the Opel Corsa F
Removing the Rear Bumper on the Opel Corsa F
Vauxhall Corsa (2019-2026 / Corsa F) Let's discover the main steps that will allow you to remove the rear bumper on the Opel Corsa F in simple and quick steps. Start by removing all the …
Dismantling Rear Bumper on Opel Corsa C
Dismantling Rear Bumper on Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) In this tutorial, you will learn how to remove the rear bumper from an Opel Corsa C. First, remove the screws located under the bumper and then those…
Removing the Rear Bumper of the Opel Corsa
Removing the Rear Bumper of the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) This short guide will show you how to remove and replace the rear bumper of the Opel Corsa, following these simple steps. First, open the boot lid an…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos