Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Headlamp Bulb on Opel Corsa

Model: Vauxhall Corsa Corsa B - Years 1993-2000
Part: Tail light bulb

Is the rear headlamp bulb not working? Let’s replace the bulbs. Open the boot lid, remove the inspection cover (located at the side of the boot) and using a socket wrench or screwdriver with a bit, unscrew the securing nuts located at the side of the rear headlamp (remove the rear bumper at the top); detach the headlamp from the bodywork (disconnect the relevant power connectors). Replace the damaged bulbs with identical size and voltage replacements. Finally, refit the headlamp onto the bodywork and tighten the nuts, covering with the cover.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the bulb of a rear headlight of an Opel Corsa
How to replace the bulb of a rear headlight of an Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) In the video in question, you can see the steps to follow to replace the bulb of a rear headlight of an Opel Corsa car. Open the trunk of the car and…
How to replace the rear headlight bulb of an Opel Corsa?
How to replace the rear headlight bulb of an Opel Corsa?
Vauxhall Corsa (2014-2019 / Corsa E) To replace the rear headlight bulb of an Opel Corsa, start by opening the rear hatch. Find the access panel inside the trunk, usually located behind …
How to replace the rear headlight bulb of the Opel Corsa
How to replace the rear headlight bulb of the Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) To replace the rear headlight bulb of the Opel Corsa, we must first open the trunk and unscrew the two screws of the headlight; once the screws are r…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos