Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to clean the mass air flow sensor on a Peugeot

Model: Peugeot Peugeot Various
Part: MAF sensor

In this video we can see how to clean the Mass Air Flow (MAF) sensor on a Peugeot car: its function is to measure the amount of air taken in by the engine. It is located on the air filter box, and we will need to remove the electrical connector of the sensor. On some cars, it is further secured by two sealing screws; loosen the clips of the clamp and completely remove the sensor, which can be easily cleaned with a specific cleaner for the MAF sensor; we will focus the cleaner flow on the highlighted pin in the video. Be careful not to touch it with your hands! Then let it dry well in the air before putting it back in place.

Posted on 18 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to clean the EGR valve on a Peugeot
How to clean the EGR valve on a Peugeot
Peugeot Peugeot Various Lift the bonnet and secure it, then remove the soundproofing panel covering the cylinder head from the engine compartment. Start by unscrewing the se…
Cleaning the AdBlue Injector on a PSA Group Vehicle
Cleaning the AdBlue Injector on a PSA Group Vehicle
Peugeot Peugeot Various In this video, we see that the YouTuber has cleaned the injector and the AdBlue seat of a PSA group vehicle (we could not identify the model, but it …
Removing the Heating Fan from Peugeot 405
Removing the Heating Fan from Peugeot 405
Peugeot Peugeot Various Learn how to remove the heating air fan from a Peugeot 405. Enter the car door and remove the plastics under the dashboard (right side). Once you loc…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos