Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Coolant Temperature Sensor from a Peugeot?

Model: Peugeot Peugeot Various
Part: Engine coolant temperature sensor

Video tutorial

Today, we will explain how to remove the coolant temperature sensor from a Peugeot. To perform this operation, open the front bonnet and remove the protective cover by unscrewing the screws on it. After opening the protective cover, use a flat screwdriver to disconnect the connector that links the sensor to the reservoir.

Using a star screwdriver, unscrew the small screws on the sensor to remove it. The installation of the new sensor follows the reverse procedure. Before installing, it is crucial to clean the connector of any rust using WD-40 spray.


Posted on 7 August 2026 by ScegliAuto


Related tutorials

How to change the fuel filter of a Peugeot/Citroen 1.6 HDi
How to change the fuel filter of a Peugeot/Citroen 1.6 HDi
Peugeot Peugeot Various In this video we see how to change the diesel filter of a Peugeot/Citroen 1.6 HDi engine: to access the filter it will be necessary to remove the air…
How to clean the mass air flow sensor on a Peugeot
How to clean the mass air flow sensor on a Peugeot
Peugeot Peugeot Various In this video we can see how to clean the Mass Air Flow (MAF) sensor on a Peugeot car: its function is to measure the amount of air taken in by the e…
How to Reset the AdBlue Warning Light on a Peugeot
Peugeot Peugeot Various The AdBlue warning light on a Peugeot vehicle illuminates when it is necessary to refill the liquid in the tank. To reset the warning light, turn on …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos