Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Twin Seat on a Peugeot Boxer MK2 with a Single Seat

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Seat

See other generations:
Video tutorial

This video shows how the YouTuber replaced the front twin seat of a Peugeot Boxer with a single seat, all while avoiding the activation of warning lights on the dashboard. It was necessary to remove one of the seat belts, and there are two seat sensors to indicate that the seat is occupied, which activates the seatbelt warning chime.

Two 400 Ohm resistors were connected and inserted into the connectors, resolving the issue.


Updated on 17 October 2026 by ScegliAuto


Related tutorials

How to Set the Time on a Peugeot Boxer
How to Set the Time on a Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) Before you can start, sit in the driver's seat of your Peugeot Boxer. Begin by activating the instrument cluster by turning the key in the ignition s…
How to Replace the Front Headlamp Bulb on the Peugeot Boxer 2015
How to Replace the Front Headlamp Bulb on the Peugeot Boxer 2015
Peugeot Boxer (2006-2024 / MK 2) If you own a Peugeot Boxer second series (2015) and want to learn how to replace the front headlamp bulb, just carefully read the instructions below …
How to reset the urea "AdBlue" warning light on a Peugeot Boxer?
How to reset the urea "AdBlue" warning light on a Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) Good morning and welcome back to Scegliauto.com! Today's objective is to reset the "AdBlue" warning light on our Peugeot Partner. Note: before perfor…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos