Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Boxer
    4. : Shocks

Peugeot Boxer - Shocks

Shocks Peugeot Boxer (2006-2024 / mk 2)

Peugeot Boxer (2006-2024 / MK 2)
Replacing the Shock Absorber Spring on a Peugeot Boxer/Fiat Ducato
The vehicle in the video - a Peugeot Boxer, identical to a Fiat Ducato - had a broken coil spring, failing the MOT: the problem was at the front axle. Lift the …Read all…
Posted on 10 April 2026 by ScegliAuto
Peugeot Boxer (2006-2024 / MK 2)
How to Replace the Rear Shock Absorbers on the Peugeot Boxer Van?
In this tutorial, you will see how to replace the rear shock absorbers on the Peugeot Boxer van, a very simple and quick operation. First, lift the rear of the …Read all…
Posted on 30 September 2026 by ScegliAuto
Peugeot Boxer (2006-2024 / MK 2)
How to Replace the Front Shock Absorber on a Peugeot Boxer
To replace the front shock absorber on a Peugeot Boxer, detach the dashboard cover located at the bottom left of the steering column. Underneath, you will find …Read all…
Posted on 7 October 2026 by ScegliAuto
Shocks (3) Car stereo (2) Battery (3) Transmission (1) Glow plugs (3) Body (2) Key (5) Timing belt (4) Onboard computer (1) Checks and maintenance (13) Headlight (2) Tail light (1) Air filter (1) Cabin air filter (6) Diesel fuel filter (2) Clutch (5) Grille (1) Light bulb (1) Side marker bulb (2) Headlight bulb (6) Tail light bulb (1) License plate light (1) Engine (2) Power window motor (1) Starter motor (2) Engine oil (4) Clock (8) Door trim panel (1) Rear bumper (1) Pump (1) Fuel pump (2) Car door (1) Instrument cluster (2) Radiator (2) Wheel (2) Fuse box (36) Seat (1) Suspension system (2) Side mirror (8) AdBlue warning light (5) Warning light – error code (8) Tire pressure warning light (1) Service warning light (46) Windshield wipers (2) Valve (1) EGR valve (4)

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos