Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. Boxer
  6. : Air filter

Peugeot Boxer - Air filter

Peugeot Boxer (2006-2023 / MK 2)
How do you replace the Peugeot Boxer air filter?

In order to replace the Peugeot Boxer air filter, you need to open the bonnet, so that you have access to the components inside the engine compartment: the air …read all…
Posted on 8 May 2023 by ScegliAuto

Shock absorbers (2) Car stereo (1) Battery (3) Glow plugs (1) Key (1) Timing belt (1) -board computer (5) Checks and maintenance (27) Headlight (1) Air filter (1) Cabin air filter (2) Diesel filter (1) Clutch (3) Grille (1) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (5) Rear light bulb (1) License plate light (1) Window motor (1) Starter motor (2) Engine oil (1) Door panel (1) Rear bumper (1) Pump (1) Fuel pump (1) Instrument cluster (9) Radiator (1) Wheel (2) Fuse box (19) Suspensions (1) Outside rearview mirror (6) Windscreen wipers (1) Valve (1) EGR valve (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos