Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Boxer
    4. : Glow plugs

Peugeot Boxer - Glow plugs

Glow Plugs Peugeot Boxer (2006-2024 / mk 2)

Peugeot Boxer (2006-2024 / MK 2)
How do you replace the glow plugs of the Peugeot Boxer?
The replacement of the glow plugs of the Peugeot Boxer can be carried out by opening the hood to access the engine compartment: it will be necessary to …Read all…
Posted on 13 September 2025 by ScegliAuto
Peugeot Boxer (2006-2024 / MK 2)
Guide to replacing the glow plugs on the Peugeot Boxer 2.3
In this guide, we will see the main instructions on how to disassemble and replace the engine glow plugs on the Peugeot Boxer 2.3, but also on the Fiat Ducato. …Read all…
Posted on 12 July 2025 by ScegliAuto
Peugeot Boxer (2006-2024 / MK 2)
Where are the glow plugs located in the Peugeot Boxer van?
In this video, you can see where the glow plugs are positioned in the Peugeot Boxer van and how to access them if you need to replace them. As shown, they are …Read all…
Posted on 4 August 2026 by ScegliAuto
Shocks (3) Car stereo (2) Battery (3) Transmission (1) Glow plugs (3) Body (2) Key (5) Timing belt (4) Onboard computer (1) Checks and maintenance (13) Headlight (2) Tail light (1) Air filter (1) Cabin air filter (6) Diesel fuel filter (2) Clutch (5) Grille (1) Light bulb (1) Side marker bulb (2) Headlight bulb (6) Tail light bulb (1) License plate light (1) Engine (2) Power window motor (1) Starter motor (2) Engine oil (4) Clock (8) Door trim panel (1) Rear bumper (1) Pump (1) Fuel pump (2) Instrument cluster (2) Radiator (2) Wheel (2) Fuse box (33) Seat (1) Suspension system (2) Side mirror (8) AdBlue warning light (5) Warning light – error code (8) (1) Service warning light (42) Windshield wipers (2) Valve (1) EGR valve (4)

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos