Do it yourself
| ||||
|
Peugeot Boxer - Video tutorial
Model: Peugeot Boxer
MK 2
- Years 2006-2023 In this video, we can see where the glow plugs are located in the Peugeot Boxer van and how to access them in case we need to replace them. As shown, they are located in the upper area of the engine, and to access them, we will need to remove both the engine cover and the front grille. Once this is done, we can remove the intake manifold and finally access the glow plugs. Since they can be very fragile, we should unscrew them with a constant but not excessive force. We can also apply some penetrating spray to facilitate the operation. The same recommendations apply to the assembly phase of the spare parts.
Posted on 4 July 2023 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.014
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |