Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the glow plugs on the Peugeot Boxer 2.3

Model: Peugeot Boxer MK 2 - Years 2006-2024
Part: Glow plugs

In this guide, we will see the main instructions on how to disassemble and replace the engine glow plugs on the Peugeot Boxer 2.3, but also on the Fiat Ducato. First, we open the vehicle's engine hood and start removing the air intake duct, unscrewing the fixing screws at the base with a socket wrench with extension, thus accessing the glow plugs; we disconnect the connectors to unscrew and remove them, as shown in the video. At this point, we install the new original glow plugs, tightening gently, following the video tutorial until the end!

Posted on 12 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the glow plugs of the Peugeot Boxer?
How do you replace the glow plugs of the Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) The replacement of the glow plugs of the Peugeot Boxer can be carried out by opening the hood to access the engine compartment: it will be necessary …
Where are the glow plugs located in the Peugeot Boxer van?
Where are the glow plugs located in the Peugeot Boxer van?
Peugeot Boxer (2006-2024 / MK 2) In this video, you can see where the glow plugs are positioned in the Peugeot Boxer van and how to access them if you need to replace them. As shown,…
How to start a Peugeot Boxer at -28°C
How to start a Peugeot Boxer at -28°C
Peugeot Boxer (1993-2006 / MK 1) Starting a diesel engine at -28°C in the Russian winter is a significant challenge: the low temperatures make the diesel fuel denser, the battery les…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos