Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Boxer
    4. : How do you replace the clutch of the Peugeot Boxer?

Peugeot Boxer - Video tutorial

Model: Peugeot Boxer MK 1 - Years 1993-2006
Part: Clutch
Operation: How do you replace the clutch of the Peugeot Boxer?

To replace the clutch on the Peugeot Boxer, it is necessary to loosen the screws that secure the gearbox to its housing: the gearbox can be removed by loosening the screws accessible from the bottom of the engine compartment and it will also be necessary to loosen and remove the left front wheel. Once the gearbox has been removed from its housing, the clutch can be located between the engine block and the gearbox: in this way it will be possible to remove it completely and replace it with a new one. After installing the new clutch, all the components that were removed can be reassembled.


Posted on 24 April 2024 by ScegliAuto

Other guides that may interest you

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos