Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Peugeot Boxer key remote control

Model: Peugeot Boxer MK 2 - Years 2006-2024
Part: Key

In these short and simple steps, we will see how to disassemble and replace the battery of the remote control key for the Peugeot Boxer, as well as the Fiat Ducato. First, take your remote control and start by removing the physical key from the remote, then levering the sides to remove the covers; this will allow you to access the electronic board and the battery, as shown in the video. At this point, remove the battery and replace it with a new one of the correct type and with the same code; finally, reassemble the remote control, following the video until the end!

Posted on 18 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery on a Peugeot Boxer
How to Replace the Remote Battery on a Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) The battery for the remote on the Peugeot Boxer is located inside a designated compartment in the remote body. This needs to be extracted to replace …
Replacing the Remote Battery for the Peugeot Boxer
Replacing the Remote Battery for the Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) The remote that opens and closes the doors of the Peugeot Boxer is powered by a CR2032 battery, which depletes over time and use: when this happens, …
How to Replace the Battery in the Peugeot Boxer Key
How to Replace the Battery in the Peugeot Boxer Key
Peugeot Boxer (2006-2024 / MK 2) Replacing the battery in the smart key of the Peugeot Boxer is undoubtedly one of the simplest and quickest maintenance tasks you can perform yoursel…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos