Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper of the Renault Master

Model: Renault Master MK 2 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Rear bumper

See other generations:
Video tutorial

Today we will discover the instructions that will allow us to disassemble and replace the rear bumper of the Renault Master. First, we open the rear doors of the vehicle and start unscrewing all the fixing screws we find on the top and bottom; we remove the side covers to unscrew the additional screws of the rear bumper, as shown in the video.

At this point, we remove the rear bumper and replace it if necessary with a new one, checking the condition of the supports; we properly fix the rear bumper with all the screws, applying the reverse process!


Posted on 4 January 2025 by ScegliAuto


Related tutorials

How to replace the rear headlight bulb of the Renault Master
How to replace the rear headlight bulb of the Renault Master
Renault Master (2010-2023 / MK 3) If you need to replace the rear headlight bulb of your Renault Master, but you don't know how to do it, then you just have to carefully read the foll…
How to Replace the Radiator in the Renault Master Van
How to Replace the Radiator in the Renault Master Van
Renault Master (2010-2023 / MK 3) In this tutorial, you will see how to replace the radiator in the Renault Master van, a task that requires good manual skills. First, open the bonnet…
Guide to disassemble the front headlight of the Renault Master
Guide to disassemble the front headlight of the Renault Master
Renault Master (2010-2023 / MK 3) Today we will see the instructions that will allow us to disassemble and replace the front headlight of the Renault Master. First, we open the vehicl…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos