Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to access the service menu on the Renault Master III

Model: Renault Master MK 3 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Instrument cluster

See other generations:
Video tutorial

In this video we can see how to access the service menu of the Renault Master III: with this menu we can perform various tests, such as scanning the gauges, activating the turn signals to verify their functionality, testing the LCD display, and activating the audible signal.

We can also check the fuel level in the tank in liters, the fuel flow with the engine running, and recognize some simple error codes.

To access the menu, we hold down the button located at the end of the lever on the right side of the steering wheel and turn on the ignition, then release it; this will start the test mode of the gauges and the LCD screen, on which error codes may appear as numbers.


Posted on 12 October 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Renault Master III
How to Reset the Service Light on a Renault Master III
Renault Master (2010-2023 / MK 3) In this video, we can see how to reset the service light on a Renault Master III: first, turn on the ignition without starting the engine, then scrol…
How to Reset the Service Light on a Renault Master
How to Reset the Service Light on a Renault Master
Renault Master (2010-2023 / MK 3) To reset the service light on a Renault Master 2, follow these steps: Turn on the ignition without starting the engine. Press the reset button on the…
Replacement of the heating control unit on Renault Master III
Replacement of the heating control unit on Renault Master III
Renault Master (2010-2023 / MK 3) In this video we see how to replace the air conditioning control unit on a Renault Master III van: the youtuber had removed the control unit to chang…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos