Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel in the Renault Master Van?

Model: Renault Master MK 3 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Steering wheel

See other generations:
Video tutorial

In this tutorial, you will see how to remove the steering wheel in the Renault Master van, a very simple and quick operation. Before doing this, open the bonnet and disconnect the negative terminal of the battery to prevent accidental airbag activation.

Start by sitting in the driver's seat, then locate the two holes at the back of the steering wheel. Insert two thin, long screwdrivers into these holes and press them firmly to unlock the airbag retaining clips.

Next, separate the airbag from the steering wheel and, using a Torx T50 key, unscrew the large central bolt.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

Where is the Battery Located in the Renault Master Van?
Where is the Battery Located in the Renault Master Van?
Renault Master (2010-2023 / MK 3) In this video, you can see where the battery is located in the Renault Master van, useful if you need to replace it. As shown, the battery is not pos…
Where is the battery located in the Renault Master van?
Where is the battery located in the Renault Master van?
Renault Master (2010-2023 / MK 3) In this video, you can see where the battery is located in the Renault Master van, useful in case you need to replace it. As shown, the battery is no…
Where is the battery located in the Renault Master van?
Where is the battery located in the Renault Master van?
Renault Master (2010-2023 / MK 3) This video shows where the battery is located in the Renault Master van and how to access it, useful in case you need to replace it, recharge it, or …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos