Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to turn off the airbag light when changing the seat on the Renault Master 2

Model: Renault Master MK 3 - Years 2010-2023
Part: Airbag

In this video we see how to fix a problem that arises when we change the seat of our Renault Master II: the airbag warning light coming on. In fact, when we change the seat, we move the airbag sensor that is located underneath. We will need a 3 ohm resistor; they are sold in packages of at least 25; the ones recommended by the youtuber cost 5.56 pounds + 10.99 pounds for delivery (but they can be found in any electronics store). This operation must be done with the ignition off; we identify the brown, red, and white wires on the connector, and insert the resistor to connect the wires; either by cutting them or inserting it as shown in the video and securing it with tape. We try turning on the ignition and see that the airbag warning light has turned off.

Posted on 24 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace a light bulb in the Renault Master 4?
How do you replace a light bulb in the Renault Master 4?
Renault Master (2024-2026 / MK 4, XDD) In this video, we will learn how to independently replace a bulb in the Renault Master 4, specifying that the vehicle used in the aforementioned vide…
How to remove the armrest of the seat of the Renault Master 2012
How to remove the armrest of the seat of the Renault Master 2012
Renault Master (2010-2023 / MK 3) If you are curious to find out how you can easily disassemble the armrest of the seat of your Renault Master (2012) then all you have to do is read a…
How to Remove the Steering Wheel in the Renault Master Van?
How to Remove the Steering Wheel in the Renault Master Van?
Renault Master (2010-2023 / MK 3) In this tutorial, you will see how to remove the steering wheel in the Renault Master van, a very simple and quick operation. Before doing this, open…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos