Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the airbag from the steering wheel of the Renault Clio

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Airbag

See other generations:
Video tutorial

Removing the airbag located inside the steering wheel of the 2003 Renault Clio model is a simple and quick operation to perform independently. To remove the airbag, use a flat screwdriver.

Insert the flat screwdriver into the side hole of the steering wheel. Move the screwdriver inside the hole so that it can activate the airbag lever and open the central body.

Disconnect the airbag connector to extract it from its housing. It is important during this process that the vehicle's battery is disconnected.


Posted on 14 April 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel Airbag from a Renault Clio
How to Remove the Steering Wheel Airbag from a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Follow the steps to dismantle and replace the steering wheel airbag on a Renault Clio, using the instructions below. First, open the bonnet of your c…
How to Remove the Airbag on a Renault Clio
How to Remove the Airbag on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) How to remove the airbag from a Renault Clio? Follow this guide. Before removing the airbag in the vehicle, disconnect the battery power cables. Unsc…
How to Remove the Steering Wheel Airbag on a Renault Clio
How to Remove the Steering Wheel Airbag on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) This guide shows how to remove the steering wheel airbag on a Renault Clio. Before removing the steering wheel, disconnect the car's power terminals.…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos