Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Airbag from a Renault Clio V

Model: Renault Clio Clio V, Clio 5 - Years 2019-2026
Part: Airbag

If you want to remove the airbag from your Clio V, the first step is to disconnect the negative terminal of the battery to avoid the risk of accidental deployment. Wait at least 10 to 15 minutes for the residual charge to dissipate, then locate the access holes on the back of the steering wheel and insert thin screwdrivers into them to lever the metal spring that holds the airbag; repeat on the other side. Carefully lift and disconnect the yellow electrical connectors (standard colour for airbags) on the back of the module without pulling on the wires.

Posted on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Airbag from a Renault Clio
Removing the Airbag from a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Is the airbag in your Renault Clio malfunctioning? Let's look at how to remove the airbag from the steering wheel. This is a simple operation. Discon…
How to Remove the Airbag and Steering Wheel from the Renault Clio
How to Remove the Airbag and Steering Wheel from the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this video tutorial, you will learn how to disassemble and replace the airbag and steering wheel of the Renault Clio, following the instructions b…
How to Remove the Airbag on a Renault Clio 3
How to Remove the Airbag on a Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Removing the airbag on a Renault Clio is not difficult; you need a few tools to make the process easier. Start by disconnecting the battery to avoid …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos