Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on a Renault Clio V

Model: Renault Clio Clio V, Clio 5 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Battery

See other generations:
Video tutorial

To replace the battery on a Renault Clio V, open the bonnet: the battery is located on the right side of the engine compartment. Disconnect the monitoring unit connector (flat screwdriver).

Unscrew the support plate (13 mm socket). Always disconnect the negative terminal first (10 mm socket), then the positive terminal after removing the red cover.

Disconnect the breather hose (if present) and remove the fabric cover. Extract the old battery.

Clean the tray and terminals with sandpaper or a wire brush. You can find the new battery on Amazon with code B00KNQTRGY for £70.00, with free delivery.

Insert the new battery, apply copper grease to the terminals, and reattach the fabric cover. Reconnect the positive terminal first, then the negative.

Reattach the monitoring unit connector and the breather hose. Tighten the support plate.


Posted on 9 August 2026 by ScegliAuto


Related tutorials

How to Change the Key Battery of the Renault Clio 5
How to Change the Key Battery of the Renault Clio 5
Renault Clio (2019-2026 / Clio V, Clio 5) To change the battery inside your Renault Clio fifth series key by yourself, follow the procedure described in this new guide. First, take the key an…
How to Change the Battery in a Renault Clio
How to Change the Battery in a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To change the battery in the Renault Clio III, open the bonnet of the vehicle, remove the battery cover, and disconnect the negative terminal (the bl…
How to Change the Remote Battery on the Renault Clio 4
How to Change the Remote Battery on the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) If the smart remote for your Renault Clio Mk4 has suddenly stopped working due to a completely flat battery and you want to know how to replace it, s…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos