Do it yourself
Frequently asked questions about cars and motorcycles

How to open the hood with the lever in the Renault Clio

Model: Renault Clio Clio V, Clio 5 - Years 2019-2026
Part: Body

To open the hood of the Renault Clio, enter from the driver's side and locate the release lever situated low, near the door latch area and the side trim of the footwell. Pull the lever firmly until it reaches the end of its travel: this will release the hood from the main latch and it will rest on the first safety catch. At this point, move to the front of the car. Insert your hand under the front edge of the hood, near the central area of the grille, and look for the safety latch. Activate it in the direction of release and simultaneously lift the hood upward, without jerking. Once opened, ensure that the hood remains securely in position using the support system provided (rod or other support, depending on the configuration), so you can work safely in the engine compartment. If the hood does not release after pulling the lever, try again with a full pull and check for any unusual tension on the cable; if the front latch feels stiff, avoid forcing it with tools and verify that you are acting on the correct lock lever.

Posted on 11 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2019-2026 / Clio V, Clio 5) To open the bonnet of the Renault Clio model 5 produced from 2019 to present, pull the bonnet release lever located next to the pedal box. Once the l…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this tutorial, you will see how to open the bonnet on a Renault Clio 4, a very simple operation that follows the standard procedure for most vehic…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today's video will show you how to open the bonnet of the Renault Clio in simple and quick steps. First, open the front door and start pulling the pl…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos