Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Ventilation Grilles from the Renault Clio II

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Grille

See other generations:
Video tutorial

This video shows how to remove the ventilation grilles from the Renault Clio II. It is a very simple process. The YouTuber demonstrates it using a flat-head screwdriver, but if you pay attention, you can see that the screwdriver leaves small scratches on the plastic of the console.

Therefore, it is recommended to perform the operation with a plastic trim tool, specifically designed for this use, which does not scratch or leave marks on the plastic material. You can obtain a set of four of these trim tools, for example, on eBay with the code 166156170386 for £4.74, including shipping.


Updated on 9 October 2026 by ScegliAuto


Related tutorials

How to disassemble the gear knob of a Renault Clio?
How to disassemble the gear knob of a Renault Clio?
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To remove the gear knob of your Renault Clio, simply grab it firmly and pull upwards with some force. Make sure to exert a uniform and steady pressur…
How to Remove the Rear Lights on a Renault Clio?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this tutorial, you will see how to remove the rear lights on a Renault Clio, a very simple and quick operation. First, ensure the key is not inser…
Replacing the Cabin Air Filter in a Renault Clio IV
Replacing the Cabin Air Filter in a Renault Clio IV
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this video, see how a specific filter has been installed on the intake to prevent dust and dirt from entering the ventilation circuit of the Renau…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos