Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the cabin air filter of the Renault Clio IV

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Cabin air filter

In this video we see how, to prevent dust and dirt from entering the ventilation system of the Renault Clio IV, a specific filter has been installed on the intake. To ensure effectiveness, we must replace it periodically. To do this, we open the front hood, remove the seal near the windshield on the passenger side, unscrew the screw that secures the panel above the shock absorber attachment. This way we can access the cover of the filter box, which we will open after unscrewing the three screws, remove the old filter and replace it with a new one, put the cover back on, tighten the screws, position the panel and put the seal back on.

Posted on 3 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The information provided in this guide will allow us to remove and replace the cabin air filter of the Renault Clio. First, we open the front door on…
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Changing a worn cabin filter? Let's look at replacing the cabin air filter on a Renault Clio. Disconnect the plastic cover of the air filter housing …
Renault Clio (2019-2026 / Clio V, Clio 5) Replacing the cabin air filter on a Renault Clio 5 is a simple and quick task to perform on your own. To carry out the replacement, get into the vehi…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos