Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Lights on a Renault Clio?

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Tail light

In this tutorial, you will see how to remove the rear lights on a Renault Clio, a very simple and quick operation. First, ensure the key is not inserted for safety. Then, open the boot, locate the two bolts on the inner edge of the light in question, and unscrew them with a cross-head screwdriver. Next, grasp the light, pull it outwards, and separate it from the bodywork. At this point, disconnect the power connector, transfer the bulbs to the replacement if necessary, and reassemble everything.

Updated on 30 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to remove the rear lights on the Renault Clio?
How to remove the rear lights on the Renault Clio?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this tutorial, we can see how to disassemble the rear lights in the Renault Clio, an extremely simple and fast operation. First of all, make sure …
How to replace the rear lights on a Renault Clio?
How to replace the rear lights on a Renault Clio?
Renault Clio (1998-2005 / Clio 2, MK 2) In this tutorial, we can see how to replace the tail lights on the Renault Clio, an extremely simple and quick operation. First of all, let's make su…
How to activate the fog lights in the Renault Clio?
How to activate the fog lights in the Renault Clio?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this tutorial, we can see how to activate the fog lights in the Renault Clio, a very simple and quick operation. First of all, let's go inside the…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos