Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs in a Renault Clio?

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Tail light bulb

In this tutorial, you will see how to replace the rear light bulbs in a Renault Clio 3, a very simple and quick operation. Before proceeding, ensure the key is not in the ignition for safety. Start by opening the boot, then unscrew the three fixing screws of the light using a Torx T20 screwdriver. Once done, lever along the outer slot with a plastic spatula, separate the light unit from the bodywork, and disconnect the power connector. At this point, simply open the rear cover and replace the faulty bulb.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulbs on a Renault Clio?
How to Replace the Rear Light Bulbs on a Renault Clio?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To replace the rear light bulbs on a Renault Clio, open the boot and loosen the three screws located between the seal and the light unit. By loosenin…
How to Replace the Rear Light Bulbs on a Renault Clio?
How to Replace the Rear Light Bulbs on a Renault Clio?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To replace the rear bulbs on a Renault Clio, you need to distinguish between the reverse lights and the other bulbs: the reverse lights can be replac…
How to Replace the Rear Light Bulb on the Renault Clio
How to Replace the Rear Light Bulb on the Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In today's tutorial video, you will see how to remove and replace the rear light bulbs on the Renault Clio, following the instructions below. First, …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos