Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on a Renault Clio?

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Light bulb

To replace the rear light bulbs on a Renault Clio, open the boot and loosen the three screws located between the seal and the light unit. By loosening these three screws, the light can be removed from its housing after disconnecting the connector. By unclipping the retaining clips of the support at the back of the light, you can extract it and replace the affected bulbs. After replacement, reposition the support at the back of the light; then reconnect and insert the light back into its place.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulbs on a Renault Clio?
How to Replace the Rear Light Bulbs on a Renault Clio?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To replace the rear bulbs on a Renault Clio, you need to distinguish between the reverse lights and the other bulbs: the reverse lights can be replac…
How to replace the rear headlight bulbs in the Renault Clio?
How to replace the rear headlight bulbs in the Renault Clio?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this tutorial, we can see how to replace the rear light bulbs in the Renault Clio, an extremely simple and fast operation. First of all, make sure…
How to Replace the Rear Light Bulbs in the Renault Clio?
How to Replace the Rear Light Bulbs in the Renault Clio?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this tutorial, you will see how to replace the rear light bulbs in the Renault Clio, a very simple and quick operation. First, ensure that the ins…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos