Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs in the Renault Clio?

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tail light bulb

See other generations:
Video tutorial

In this tutorial, we can see how to replace the rear light bulbs in the Renault Clio, an extremely simple and fast operation. First of all, make sure the key is not inserted, then open the trunk door, locate the screws positioned along the inner edge of the headlight in question and unscrew them using a Torx T20 key. Then, grab the headlight, pull it outwards and separate it from the bodywork.

At this point, all that remains is to disconnect the power connector, open the internal base, replace the faulty bulb and reassemble everything following the reverse procedure.


Posted on 4 May 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulbs on a Renault Clio?
How to Replace the Rear Light Bulbs on a Renault Clio?
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To replace the rear light bulbs on a Renault Clio, open the boot and loosen the three screws located between the seal and the light unit. By loosenin…
How to Replace the Rear Light Bulbs in the Renault Clio?
How to Replace the Rear Light Bulbs in the Renault Clio?
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this tutorial, you will see how to replace the rear light bulbs in the Renault Clio, a very simple and quick operation. First, ensure that the ins…
How to Replace the Rear Light Bulbs in a Renault Clio?
How to Replace the Rear Light Bulbs in a Renault Clio?
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this tutorial, you will see how to replace the rear light bulbs in a Renault Clio 3, a very simple and quick operation. Before proceeding, ensure …

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos