Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the bulbs in the front headlights of a Renault Clio III

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight

See other generations:
Video tutorial

To replace the bulbs in the front headlights of a Renault Clio III, you need to open the bonnet. On the passenger side, the bonnet latch is accessible via a hook that needs to be released.

Touch the hook to free the latch. To change the bulb, it is not necessary to remove the entire bumper.

Remove the black rear cover of the headlight and disconnect the electrical connector. The bulb is accessible in a tight space, so you will need to work with some care.

Extract the bulb by twisting it and insert the new one in the same position. Reconnect the connector and refit the cover.

The procedure takes only a few minutes and a bit of attention.


Posted on 16 August 2026 by ScegliAuto


Related tutorials

Changing the Front Headlight Bulb on a Renault Clio
Changing the Front Headlight Bulb on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Are the front headlight bulbs blown and in need of replacement? Here’s how to change them on a Renault Clio. Open the front bonnet by pulling the lev…
How to Change the Front Bulb on a Renault Clio
How to Change the Front Bulb on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Do you have blown bulbs in the front headlights? Let's see how to replace the bulbs in the front headlights on a Clio. Lift the front bonnet of the c…
Replacing the Headlight Bulb of the Clio
Replacing the Headlight Bulb of the Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Are the bulbs of the front headlights of your car damaged? Here’s how to remove the bulbs from the front headlights of the Clio. To remove the headli…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos