Do it yourself
| ||||
|
Renault Clio - Video tutorial
Model: Renault Clio
MK 3, Clio 3, Clio III
- Years 2005-2013 Are the headlight bulbs burned out and need to be replaced? Let's see how they change from the headlights of a Renault Clio. We open the front hood, pulling the lever located at the bottom right of the dashboard, let's put it in safety with the rod. We open the front hood by pulling the lever located at the bottom right of the dashboard, let's put it in safety with the rod. We remove the inspection cap of the headlight (located in the rear part of the headlight). We take out the lamp holders from the headlight and we go to extract the damaged bulbs with the help of a screwdriver. We assemble the new bulbs and (always suitable type and size) we insert the lamp holder in the lighthouse housing. We cover the access with the cover cap. We turn on the headlight bulbs.
Posted on 4 December 2023 by ScegliAuto
How do you replace the headlight bulb on the Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To be able to replace the headlight bulb on your Renault Clio 4, you need to open the bonnet and access the inside of the headlight corresponding to
How to replace the headlight bulb on Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) The replacement of the headlight bulb of the Renault Clio 4 is carried out by opening the hood so that you can access the rear part of the headlight
How do you replace the front headlight bulb of the Renault Clio 2?
Renault Clio (1998-2005 / Clio 2, MK 2) In order to replace the headlight bulb of the Renault Clio, you need to open the hood so that you can access the internal part of the headlight assem Other guides that may interest you
|
Frequently Asked QuestionsFiat Ducato 2.8 JTD gearbox oil replacementLet's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.081
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |