Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on a Renault Clio

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
Video tutorial

To replace the front headlight bulb on a Renault Clio 3, you need to remove the headlight. Open the bonnet and locate the fixing screws of the headlight unit to the bodywork.

Unscrew the upper and side or lower bolts, then grasp the headlight and gently pull it outwards to free it from the housing. Once removed, locate the bulb holder at the back of the headlight, disconnect the electrical connector, and turn the bulb holder anti-clockwise to extract the burnt bulb.

Insert the new bulb of the same type, turn the bulb holder clockwise to secure it, reconnect the connector, and reassemble the headlight by repositioning it in the housing and tightening all the fixing screws.


Posted on 14 September 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on a Renault Clio 2?
How to Replace the Front Headlight Bulb on a Renault Clio 2?
Renault Clio (1998-2005 / MK 2, Clio 2) To replace the front headlight bulb on a Renault Clio, open the bonnet to access the interior of the headlight unit. Here, you will find the cover pr…
How to Replace the Front Headlight Bulb on a Renault Clio 4?
How to Replace the Front Headlight Bulb on a Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To replace the front headlight bulb on a Renault Clio 4, open the bonnet to access the rear of the headlight corresponding to the bulb to be replaced…
How to Replace the Front Headlight Bulb on a Renault Clio
How to Replace the Front Headlight Bulb on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) The following instructions will allow you to remove and replace the front headlight bulb on a Renault Clio. First, open the engine bonnet of the vehi…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos