Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the air control panel light bulb of the Renault Clio 2

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Light bulb

Today we will explain how to replace the bulb of the air control panel of the Renault Clio model 2. To perform the replacement of the bulb, we must first remove the radio. Using four flat-tip screwdrivers, we remove the radio by inserting the screwdriver into the holes located on the sides of the radio. We extract the radio and disconnect the connector, using a T20 key we unscrew the three screws located on the air control panel. We remove the panel and using a flat-tip screwdriver we open the light fixture to replace the bulb. After inserting the new bulb, we close the light fixture, insert the panel into its housing and screw the three screws using the T20 key. We connect the radio connector and insert the radio into its housing.

Posted on 18 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To replace the number plate bulb on a Renault Clio, you need to use an object to extract the light from its housing; once the light has been removed,…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To replace the rear light bulb in a Renault Clio 4, open the tailgate to access the screws that secure the light in its housing: once these screws ar…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this short guide, we will see the instructions necessary to disassemble and replace the front fog light and bulb of the Renault Clio. First, move …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos