Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in the Renault Clio 4

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Cabin air filter

See other generations:
Video tutorial

To maintain optimal air quality inside your Renault Clio Mk4, you must periodically replace the cabin air filter. Here’s how. Once the car is completely off, go to the passenger side and remove the entire glove compartment.

Next, reach the lower area of the dashboard and remove the small protective panel on the left side. Just below, you will find the filter to replace.

Simply remove it and fit a new filter. Finally, reposition the panel and reassemble the glove compartment.


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to Change the Cabin Filter on a Renault Clio
How to Change the Cabin Filter on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Changing a worn cabin filter? Let's look at replacing the cabin air filter on a Renault Clio. Disconnect the plastic cover of the air filter housing …
How to Replace the Cabin Filter in the Renault Clio?
How to Replace the Cabin Filter in the Renault Clio?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) This tutorial shows how to replace the cabin filter in the Renault Clio, a very simple and quick operation. First, go to the passenger side, then pos…
How to Replace the Cabin Filter on a Renault Clio
How to Replace the Cabin Filter on a Renault Clio
Renault Clio (2019-2026 / Clio V, Clio 5) To replace the cabin filter on a Renault Clio, completely detach the panel located on the left side of the footwell on the passenger side. Once this …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos