Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light LED in a Renault Clio 3

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Light bulb

Has the LED in your fog light stopped working? No problem, thanks to this video you can replace it without taking the car to a mechanic. For easier access, you can lift the vehicle, but this is not essential. Locate the access panel shown in the video and open it using a plastic lever. Next, disconnect the electrical wiring and unscrew the faulty LED by turning it counterclockwise. Once removed, install the new LED by turning it clockwise, then reconnect the wiring and close the access panel.

Posted on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fog light bulb on the Renault Clio?
How to replace the fog light bulb on the Renault Clio?
Renault Clio (1998-2005 / Clio 2, MK 2) To replace the fog light bulb on the Renault Clio, you need to remove the wheel corresponding to the fog light being replaced, along with the corresp…
How to Replace the Fog Light on a Renault Clio
How to Replace the Fog Light on a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Today, we will replace the front fog light on a Renault Clio. To perform this operation, raise the vehicle to access the lower screws of the fog ligh…
How to replace the headlight and bulb of the front fog light of the Renault Clio
How to replace the headlight and bulb of the front fog light of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this short guide, we will see the instructions necessary to disassemble and replace the front fog light and bulb of the Renault Clio. First, move …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos