Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front fog light bulb of the Renault Clio

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Fog lights

These short and simple instructions will show us how to disassemble and replace the front fog light bulb of the Renault Clio. First, let's move to the front of the vehicle and start by disconnecting and removing the fog light assembly; to do this, unscrew the screws found on the sides, disconnecting the electrical connector found at the back, as shown in the video. At this point, remove the fog light bulb and replace it with a new one, of the correct type and with the same attachment; reassemble the fog light assembly and check the operation of the light!

Posted on 25 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight and bulb of the front fog light of the Renault Clio
How to replace the headlight and bulb of the front fog light of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this short guide, we will see the instructions necessary to disassemble and replace the front fog light and bulb of the Renault Clio. First, move …
How to replace the fog light bulb on the Renault Clio?
How to replace the fog light bulb on the Renault Clio?
Renault Clio (1998-2005 / Clio 2, MK 2) To replace the fog light bulb on the Renault Clio, you need to remove the wheel corresponding to the fog light being replaced, along with the corresp…
How to replace the rear fog light bulb on the Renault Clio
How to replace the rear fog light bulb on the Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The following steps will allow us to disassemble and replace the rear fog light bulb of the Renault Clio. First, let's move to the rear of the car an…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos