Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight and bulb of the front fog light of the Renault Clio

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Fog lights

In this short guide, we will see the instructions necessary to disassemble and replace the front fog light and bulb of the Renault Clio. First, move to the front of the car and start by disconnecting the electrical connector of the bulb, along with the bulb itself; replace the fog light bulb if necessary, using one with the same fitting. To remove the fog light, it will be necessary to unscrew the side screws, located inside the headlight; then replace the fog light with the new one, making the electrical connection.

Posted on 13 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front fog light bulb of the Renault Clio
How to replace the front fog light bulb of the Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) These short and simple instructions will show us how to disassemble and replace the front fog light bulb of the Renault Clio. First, let's move to th…
How to disassemble the rear fog light of the Renault Clio.
How to disassemble the rear fog light of the Renault Clio.
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Today we will discover the instructions that will allow us to disassemble and replace the rear fog light and its bulb on the Renault Clio. First, let…
How to replace the front headlight bulb on a Renault Clio 4
How to replace the front headlight bulb on a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The steps to replace the headlight bulb of a Renault Clio 4 are: -The first step is to open the front hood. -The second step is to remove the light c…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos