Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear fog light of the Renault Clio.

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Fog lights

Today we will discover the instructions that will allow us to disassemble and replace the rear fog light and its bulb on the Renault Clio. First, let's move to the back and start unscrewing the screws we find under the bumper, then detach the fog light. Next, disconnect the electrical connector of the bulb to remove it, as shown in the video. At this point, we can replace just the fog light bulb or the entire rear light, securing it properly to the bumper. Finally, we just need to check that it works correctly.

Posted on 1 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front fog light bulb of the Renault Clio
How to replace the front fog light bulb of the Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) These short and simple instructions will show us how to disassemble and replace the front fog light bulb of the Renault Clio. First, let's move to th…
How to replace the headlight and bulb of the front fog light of the Renault Clio
How to replace the headlight and bulb of the front fog light of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this short guide, we will see the instructions necessary to disassemble and replace the front fog light and bulb of the Renault Clio. First, move …
How to replace the fog light bulb on the Renault Clio?
How to replace the fog light bulb on the Renault Clio?
Renault Clio (1998-2005 / Clio 2, MK 2) To replace the fog light bulb on the Renault Clio, you need to remove the wheel corresponding to the fog light being replaced, along with the corresp…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos