Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on a Renault Clio 2?

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Tail light

See other generations:
Video tutorial

To remove the rear light on a Renault Clio 2, open the boot lid: on the side wall of the boot, near the light to be removed, there will be a knob that must be turned until it is completely removed from its housing. Once loosened, pull the light out from the outside and disconnect the corresponding connector.

After disconnecting the connector, you can remove the light and replace it with a new part. The new light must be connected to the connector and secured with the appropriate knob.


Updated on 27 April 2026 by ScegliAuto


Related tutorials

How to Remove a Rear Light on a Renault Clio
How to Remove a Rear Light on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) How do you remove a rear light from your Renault Clio? Let's see how to do it in this video. Unscrew the screws on the right side of the light perime…
Removing the Rear Light on a Renault Clio
Removing the Rear Light on a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) How to remove the rear light on a Renault Clio? Let's see how to do it. Open the boot lid, undo the plastic screw located above the fabric lining. On…
Removing the Rear Light and Replacing Bulbs on Renault Clio 3
Removing the Rear Light and Replacing Bulbs on Renault Clio 3
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) This guide shows how to remove the rear light and replace the bulbs on the third series Renault Clio, following these simple steps. First, open the t…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos