Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light on a Renault Clio

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Headlight

See other generations:
Video tutorial

Today, we will replace the front fog light on a Renault Clio. To perform this operation, raise the vehicle to access the lower screws of the fog light. Unscrew the lower screws using a 12 mm spanner.

Disconnect the fog light connector using a flat-head screwdriver. After completing the procedure, extract the fog light.

Connect the new fog light's connector, insert it, and then screw in the screws. In our video tutorial, the replacement was necessary due to the complete burnout of the fog light from water ingress, but if after replacement the fog light and thus the bulb still do not work, the connector may also be damaged and would need replacing.


Posted on 16 June 2026 by ScegliAuto


Related tutorials

How to activate the fog lights in the Renault Clio?
How to activate the fog lights in the Renault Clio?
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this tutorial we can see how to activate the fog lights in the Renault Clio, a very simple operation. These lights should only be activated in cas…
How to replace the fog light bulb on the Renault Clio?
How to replace the fog light bulb on the Renault Clio?
Renault Clio (1998-2005 / MK 2, Clio 2) To replace the fog light bulb on the Renault Clio, you need to remove the wheel corresponding to the fog light being replaced, along with the corresp…
How to disassemble the rear fog light of the Renault Clio.
How to disassemble the rear fog light of the Renault Clio.
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Today we will discover the instructions that will allow us to disassemble and replace the rear fog light and its bulb on the Renault Clio. First, let…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos