Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs in the Renault Clio?

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tail light bulb

See other generations:
Video tutorial

In this tutorial, you will see how to replace the rear light bulbs in the Renault Clio, a very simple and quick operation. First, ensure that the instrument panel is off for safety, then open the boot, locate the three screws along the inner edge of the light in question, and unscrew them with a Torx T20 spanner.

Next, separate the light from the bodywork, disconnect the connector, and open the internal base. At this point, simply replace the faulty bulb and reassemble everything by following the reverse procedure.


Posted on 23 August 2026 by ScegliAuto


Related tutorials

How to replace the rear headlight bulbs in the Renault Clio?
How to replace the rear headlight bulbs in the Renault Clio?
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) .. In this tutorial, we can see how to replace the rear light bulbs in the Renault Clio, an extremely simple and fast operation. First.. …
How to Replace the Rear Light Bulbs on a Renault Clio?
How to Replace the Rear Light Bulbs on a Renault Clio?
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To replace the rear light bulbs on a Renault Clio, open the boot and loosen the three screws located between the seal and the light unit. By loosenin…
How to Replace the Rear Light Bulbs in a Renault Clio?
How to Replace the Rear Light Bulbs in a Renault Clio?
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this tutorial, you will see how to replace the rear light bulbs in a Renault Clio 3, a very simple and quick operation. Before proceeding, ensure …

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos