Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear lights on the Renault Clio?

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Tail light

In this tutorial, we can see how to disassemble the rear lights in the Renault Clio, an extremely simple and fast operation. First of all, make sure the key is not inserted, then open the rear hatch, locate the two bolts located on the inner edge of the headlight in question and unscrew them using a Torx T20 key. Then grab the headlight, pull it outwards and separate it from the bodywork. At this point, we can disconnect the power connector, replace the faulty element and reassemble everything simply by following the reverse procedure.

Posted on 8 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Lights on a Renault Clio?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this tutorial, you will see how to remove the rear lights on a Renault Clio, a very simple and quick operation. First, ensure the key is not inser…
How to activate and deactivate the fog lights of the Renault Clio 4
How to activate and deactivate the fog lights of the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Activating and deactivating the front and rear dipped headlights of the Renault Clio IV car is a very simple and quick operation to follow. To activa…
How to activate the fog lights in the Renault Clio?
How to activate the fog lights in the Renault Clio?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this tutorial, we can see how to activate the fog lights in the Renault Clio, a very simple and quick operation. First of all, let's go inside the…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos