Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel Airbag on a Renault Clio

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Airbag

This guide shows how to remove the steering wheel airbag on a Renault Clio. Before removing the steering wheel, disconnect the car's power terminals. Insert the screwdriver into the slots at the back of the steering wheel and unscrew (or unclip) the screws securing the airbag. Once the airbag is removed, disconnect the power connectors and take it out from the steering wheel. Finally, remove the steering wheel from the steering column (if necessary). For reassembling the airbag: connect the power connector, then press it onto the steering wheel until the locking clips snap into place.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Steering Wheel Airbag from a Renault Clio
How to Remove the Steering Wheel Airbag from a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Follow the steps to dismantle and replace the steering wheel airbag on a Renault Clio, using the instructions below. First, open the bonnet of your c…
How to Remove the Steering Wheel Airbag from a Renault Clio
How to Remove the Steering Wheel Airbag from a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) How do you remove the airbag and steering wheel from a Renault Clio? Before removing the steering wheel, disconnect the battery terminals located in …
How to Remove the Airbag on a Renault Clio
How to Remove the Airbag on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) How to remove the airbag from a Renault Clio? Follow this guide. Before removing the airbag in the vehicle, disconnect the battery power cables. Unsc…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos