Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel on Renault Twingo

Model: Renault Twingo Twingo 3, Twingo III - Years 2014-2024
Part: Steering wheel

In this brief and simple guide, find instructions on how to remove and replace the steering wheel and its airbag on a Renault Twingo. First, get inside the vehicle and start by removing the airbag from the steering wheel by pushing on the rear holes; then disconnect the electrical connector, as shown in the video. Next, disconnect the wiring for the steering wheel controls using a T25 Torx key to unscrew the central screw of the steering wheel; remove the steering wheel and replace it if necessary with a new one, reconnecting the steering wheel controls and finally reassembling the central airbag.

Posted on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Steering Wheel of the Renault Twingo
Replacing the Steering Wheel of the Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) This guide briefly outlines the steps to remove and replace the steering wheel of the Renault Twingo. First, open the bonnet and disconnect the batte…
How to Remove the Steering Wheel from the Renault Twingo
How to Remove the Steering Wheel from the Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) This brief and simple guide shows you how to remove and replace the steering wheel of the Renault Twingo, following the instructions below. First, op…
Removing the Steering Wheel on a Twingo
Removing the Steering Wheel on a Twingo
Renault Twingo (1993-2007 / Twingo 1) Begin by removing the steering wheel on a Renault Twingo, including the airbag. Use a socket or screwdriver to undo the screws located behind the ste…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos