Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the airbag of a Twingo III

Model: Renault Twingo Twingo 3, Twingo III - Years 2014-2024
Part: Airbag

In this video, we see how to dismantle the airbag of a Twingo III: of course, the first thing to do when working on the airbag is to disconnect the negative terminal of the battery, to prevent the airbag from exploding in our face for any reason. On the back of the steering wheel, there are two small holes, in which we will insert a small screwdriver, in order to release the springs that will release the airbag module contained in the steering wheel. We recommend turning the steering wheel to make them easier to reach. Once the module has been removed, we must disconnect the electrical connector that connects the module to the battery. If we also need to remove the steering wheel, underneath we find the large fixing screw that we will unscrew with a suitable socket.

Posted on 1 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Steering Wheel on Renault Twingo
How to Remove the Steering Wheel on Renault Twingo
Renault Twingo (2014-2024 / Twingo 3, Twingo III) In this brief and simple guide, find instructions on how to remove and replace the steering wheel and its airbag on a Renault Twingo. First, get insi…
Replacing the Airbag on Renault Twingo
Replacing the Airbag on Renault Twingo
Renault Twingo (2014-2024 / Twingo 3, Twingo III) Replacing the airbag on a Renault Twingo is very straightforward. For safety reasons, disconnect the battery located under the bonnet. Remember to al…
Deactivating the Passenger Airbag
Deactivating the Passenger Airbag
Renault Twingo (2014-2024 / Twingo 3, Twingo III) Deactivating the passenger airbag is a procedure that is practically identical across all modern cars. As an example, we will show you on a Renault T…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos