Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the plastic cover of the steering column of the Renault Twingo

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Steering wheel

In this video we see how to remove the plastic cover of the steering column of the Renault Twingo II: we start by removing the lower cover of the steering wheel, unscrewing the two screws on the sides. We then turn the steering wheel to one side, in order to expose the screw that holds the upper part; we turn it to the other side to do the same work on the other side and so we can also remove the upper part. Now we need to remove the partition that is located under the steering column, removing the two screws that we see on the top. Now the steering column cover is completely removed.

Posted on 16 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Light Switch Lever on a Renault Twingo
How to Replace the Light Switch Lever on a Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) Before you begin, sit in the driver's seat of your Renault Twingo. Start by removing the steering column cover by unscrewing the fixing screws. Next,…
Where to Find the Fuse Box of the Renault Twingo
Where to Find the Fuse Box of the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) The Renault Twingo 2 has a single fuse box located between the steering column and the driver's door, in a small compartment covered by a plastic lid…
How to disassemble the instrument panel in the Renault Twingo?
How to disassemble the instrument panel in the Renault Twingo?
Renault Twingo (2014-2024 / Twingo 3, Twingo III) In this tutorial we can see how to disassemble the instrument panel in the Renault Twingo, an extremely simple and fast operation. First of all, make…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos